Gillender Street
Standard Decking

As part of the construction of three blocks of five- and six-storey high residential apartments at Gillender Street in Bow, East London, Ardmore Construction of Enfield was commissioned to design and manufacture 108 steel cantilever balconies.

The floor of each balcony needed to be constructed in timber decking. However, the decking specified required the steel supports to be at just 300mm centres, and this would have added significantly to the cost of fabricating each balcony. The solution

Darren Fraser of Ardmore Construction began looking into alternative decking boards, in the hope that he could significantly increase the span width and thus reduce the steel content in the balcony. The design manager on the site team suggested Marley Eternit decking. Having used Marley Eternit's high-quality boards on a previous contract, the design manager was confident that Marley Eternit could provide a solution. After contacting Marley Eternit and acquiring the technical data, Darren Fraser found that by using Marley Eternit grade C24 145×34 treated decking boards, he could open the support centres from 300mm to 640mm. This enabled him to implement his value engineering proposal. In total, some 12,000 metres (supplied in 4.2m lengths) of 145mm x 34mm thick Marley Eternit Standard castellated timber decking was supplied and installed on the 108 balconies.

Why JB Standard?

JB Standard was chosen for the Gillender Street project for its greater resistance to deflection, even at significantly wider support centres. This enabled the contractors to use less steelwork and to reduce costs. JB Standard is available in both castellated and smooth profiles and is espcially suitable for balcony decks or matching with JB Antislip Plus or JB Citideck in areas that don’t require anti-slip boards. JB Standard decking can be treated to Use Class 3 (UC3) MicroPro® or UC4 (Naturewood®) to suit individual project requirements.


Enfield-based contractors Ardmore Construction Ltd installed the Marley Eternit decking. Darren Fraser of Ardmore said: “We found that by using the firm’s grade C24 145×34 treated decking boards, we could achieve a span of up to 640mm.

Here at Marley Eternit, we are always on hand to offer practical and experienced support.