Can flat interlocking tiles be installed straight bonded?

01 December 2016

Can flat interlocking tiles be installed straight bonded?

Flat interlocking tiles must be installed to a broken bond pattern, with the interlocks staggered. This aids the performance of the tiles – the broken bond configuration allows any water draining into the interlock on one tile to disperse safely onto the flat surface of a tile below.

If the tiles are installed with the interlocks aligned, in a straight bond pattern, rainwater may drain directly from one interlocking channel into another. This can flood the interlocks, leading to water ingress. This risk is highest on low pitched roofs, as the rate of rainwater discharge is slower, leading to larger volumes of rainwater on the roof.

The broken bond pattern is also aesthetically more appealing, being in line with a slate-like appearance which the tiles are designed to simulate.

Profiled tiles are typically installed using a straight bonded pattern, due to the raised curved or angled sections on their surface. This encourages rainwater to drain into the lower channel sections, away from the interlocking channel, which is located at the higher sections.

Posted in


Here at Marley Eternit, we are always on hand to offer practical and experienced support. Select an option below or call us on 01283 722588.