Wessex Interlocking Tile

Compatible with Anglia, Ludlow Plus, Double Roman, Ludlow Major, Mendip, Duo Modern, Modern, Wessex and Plain Tiles.

The Marley Eternit  Dry Hip System provides a mechanically fixed, weathertight and attractive finish to the hip line without the use of mortar bedding. The hip tiles are secured to a PVC-u Hip Batten Section fixed to the hip tree or rafter, and utilises PVC- u Hip Unions to maintain compatibility with the Marley Eternit Dry Ridge System.

Authority
The Concrete Third Round and Modern Hip tiles are manufactured to comply with the requirements of BS EN 490 Concrete roofing tiles and fittings with BSI Kitemark Licence. The Marley Eternit Dry Hip System complies with the requirements of BS 5534 : for the mechanical fixing of Hip tiles.

Composition
The components of the System are manufactured from high durability PVC-u with closed cell rubber foam weathering strips. The Apex Capping unit is moulded from Styrosun® PVC. Fixing materials are made from high tensile stainless steel and durable aluminium.

Performance
The Marley Eternit  Dry Hip System may be used on all roof pitches up to a maximum of 45° provided the roof slopes intersect at 90° on plan. The System will also accommodate roof slopes of varying pitch either side of the hip, up to a 10° difference.

Compatibility
The Marley Eternit Dry Hip System is fully compatible with the Marley Ventilated Dry Ridge and Marley Eaves Ventilation Systems and can be used with all products in the Marley Eternit  Plain, Interlocking and Slate Ranges.

Description
* Extruded black PVC-u Hip Sections, 3m long (low or high profile to suit tile profile) are fixed to the timber hip tree or rafter using purpose-made PVC-u blocks and drive screws.
* A closed cell rubber foam strip, 3m long (low or high profile to suit tile profile) is located along each side of the Hip Section to provide weathering for the cut tiles.
* Raking cut tiles are mechanically secured to prevent slippage by using purpose-made head clips and tingle clips.
* A Block End Hip tile is fitted at the base of the hip and mechanically fixed.
* Each Hip tile is secured to the top of the PVC-u Hip Section with injection moulded PVC-u Hip Unions with neoprene rubber seals.
* The hip/ridge intersection is weathered with a Styrosun® PVC Apex Cap and is available in three sizes for roof pitches from 15° - 45°

Note: Hips with a plan angle 90° - 135°

Where hips have plan angles 90° - 135° on plan, it may be necessary to trim the downstand of the Block End Hip tile at the base of the hip to align with the eaves course of tiles. This should be done using a disc cutter, ensuring that all Health and Safety precautions are carried out.

At the apex of the hip, a purpose made Code 4/5 lead capping should be fabricated to fit over the three-way junction with the ridge (see Lead Sheet Association Lead Sheet Flashings Manual for guidance).

The edges of the lead cap should be secured using the appropriate Ridge/Hip union, ensuring that a slot is formed at each side of the cap to align with the location lugs of the Unions.

Compatible with Double Roman, Ludlow Major, Mendip, Duo Modern, Modern and Wessex tiles and fibre cement slates.

Developed to allow the designer freedom to specify a completely mortar-free roof, this Dry Valley System utilises the latest GRP technology. The advanced and unique parabolic gutter section improves discharge rates without added gutter depth.

Authority
The Marley Eternit Dry Valley System complies with the requirements of BS 5534 : for the drainage of the roofing elements and provides a weatherproof gutter lining at the valley intersection.

Composition
The Valley trough components are manufactured from high durability moulded GRP. The comb filler units are manufactured from polypropylene.

Performance
The Marley Eternit  Dry Valley System is suited for pitches 22.5° - 90°. The parabolic gutter section improves discharge rates and can accommodate valley lengths up to a maximum of 8 metres, (see BS 5534).

Compatibility
The Marley Eternit Dry Valley System is suitable for use with all large format interlocking tiles and fibre cement slates and is compatible with Marley Eternit Dry Fix and Ventilation Systems.

Description
* High efficiency gutter design for increased capacity and flow rates.
* Suitable for roof pitches from 22.5° to 90°.
* Manufactured from high quality GRP in grey finish.
* Valley Section flexes to accommodate differing pitches either side of the valley to a maximum of 15°.
* 1 metre long Comb Filler Strips, available in two depths to suit different tile profiles, prevent ingress of birds and vermin.
* Suitable for all large format interlocking concrete tiles and fibre cement slates.

Designed to provide continuous 10mm or 25mm free vent areas to roof voids, Universal Eaves Vent provides an efficient and unobtrusive roofing solution. Once again, this universal Marley system is suitable for use with virtually all tiles and slates.

It's fast
The 6m Continuous Rafter Roll makes for a quick and simple installation process. The length of the rafter simply rolls out along the length of the eaves.

It's value for money
All the components required to install the Eaves Vent System is contained in one handy 6m box.

It's Universal
Compatible for use with all tiles and slates.

It's quality assured
Quality tested and complies with BS 5250.

Dry Verge is for a strong, watertight verge without the use of mortar. Universal, boxed and ready to use, Dry Verge retains the traditional stepped appearance of a bedded verge and is suitable for use with standard concrete interlocking tiles.

It's fast
Dry Verge is a fast and easy way to install a dry verge system. The mechanical fixing means that the verge units simply slot together and is far quicker than a traditional mortar bedded verge.

It's value for money
Competitively priced and all in one box, there are 28 left hand verge units and 28 right hand verge units ready to be used straight out of the pack.

It's Universal
Compatible for use with standard concrete interlocking tiles.

It's quality assured
Quality tested and complies with BS 5534.

It's maintenance free
The dry fix method offers speed of installation, long term economy and long term safety - no need to repair failing mortar.

Dry Verge Refurbishment Kit
The Marley Dry Verge Refurbishment Kit enables damaged concrete verges to be repaired using the Marley Universal and Edgemere Dry Verge Systems or even to replace the verge before the problem hits, offering home-owners a maintenance-free and weather-tight solution.

Universal HipFast is a dry fix hip system that is compatible with all tiles, slates and standard hip tiles.

It's fast
Universal HipFast is quick and easy to install, thanks to its mechanical fixing method and the simple roll out operation of the hip roll.

It's value for money
All of the HipFast components are available in just one box and have enough product to fix a 6m length hip.

It's Universal
HipFast can be used with other manufacturers’ tiles, slates and standard hip tiles, not just Marley Roofing’s.

It's quality assured
As you would expect, HipFast passes all the necessary standards with flying colours. Tested and complies with BS 5534.

It's maintenance free
The dry fixing method offers considerable advantages, not only in the speed of installation, but also in long-term economy.

Universal RidgeFast is a low cost, ventilated dry ridge system suitable for use with all standard ridges, tiles and slates.

Its fast
Universal RidgeFast is the fast and easy way to install a ventilated dry ridge. This unique system is designed to simply roll out along the ridge and is far quicker than mortar bedding.

It's value for money
Everything that’s needed for a perfect ventilated ridge is in one handy 6m box and is competitively priced compared to similar systems.

It's Universal
Thanks to a unique fixing system Universal RidgeFast can be used with all standard ridges, tiles and slates. The 6 metre roll is easily moulded to the shape of any tile or slate and the grey colour of the side flashing replicates a mortar finish.

It's quality assured
It may be competitively priced but, just like all Marley Eternit products, Universal RidgeFast passes all the necessary standards with flying colours. Tested and complies with BS 5534 and BS 5250.

It's ventilated
Provides a minimum ventilated area of 5,000mm per linear metre and is suitable for ventilating flat tiles. Specially designed blanking strips allow you to use Universal RidgeFast with ridge and gas vent terminals.

It's maintenance free
The dry fixing method offers considerable advantages, not only in the speed of installation, but also in long-term economy and safety.

The Universal tile vent provides 15,000mm² of vent area. The vent is designed for roof void ventilation and connection to 110mm soil pipe or mechanical extract systems. It is suitable for use with most popular large format and '15 x 9' interlocking tile profiles at roof pitches of 20° and above.

Its fast
Universal Tile Vent is a fast and easy way to ventilate the roof.

It's value for money
Competitively priced and all in one box, ready to be used straight out of the pack.

It's Universal
Compatible for use with all large format and '15 x 9' interlocking tiles.

It's quality assured
Quality tested and complies with all the relevant Building Standards.

The effective answer to gas flue termination at the ridge.

The Gas Ventilation Ridge Terminal is designed solely as a ridge terminal for gas flues connected to gas appliances of rated input not exceeding 60Kw. The Gas Ventilation Ridge Terminal may either be bedded or used with the Dry Ridge System. Suitable for most duo-pitch roofs up to 60° pitch.

Authority
Gas Ventilation Ridge Terminals should be fitted in accordance with the requirements of The Building Regulations, Approved Document J, The Building Standards (Scotland) Regulations 1990 - 1994 Part F and comply with BS 5440 : Part 1. Tested and Approved by Advantica Technologies Ltd.

Composition
Concrete composite ridge tile base and hood, with stainless steel grille and bolts and aluminium throat extension box. Gasket set with locking washers available.

Performance
The Marley Gas Ventilation Ridge Terminal provides for the termination of gas appliances of rated input up to 60Kw, when connected via an 'R' Type Adaptor (not supplied), to a fully supported duct not exceeding 150mm diameter.

Compatibility
Suitable for all roofs of 15° - 60°, Marley Gas Ventilation Ridge Terminals may be either mortar bedded or installed with the Marley Ventilated Dry Ridge System. Gas Ventilation Ridge Terminals are compatible with the range of Marley Ventilation products and can only be used to terminate gas appliances of rated input up to 60Kw. Connection via the “R” type adaptor (not supplied) can accommodate up to 150mm diameter ductwork.

Designers and installers should check with the boiler/gas appliance manufacturer to establish suitability for use in the circumstances proposed. The terminal is not suitable for coal, wood or oil fired appliances, or for roof void, mechanical or passive ventilation systems.

Installation
If a ridge board is used in the roof construction, it should be cut and trimmed for a length of 400mm,with the roof underlay cut, and top batten positioned, a minimum of 25mm from the throat extension.

When used with the ventilated dry ridge system, a piece of the back of the batten section may require removal to facilitate the PVC-U riser. Blocked filler units are required for a distance of 600mm either side of the Terminal. A special adaptor ridge union is available to suit Modern ridge tile applications.

Description
* Concrete composite ridge tile and hood, in colours to match or complement the roof tiles.
* Stainless steel mesh grille allows gases to exhaust whilst preventing access to birds and vermin.
* Easily connects to fully supported internal flues by bolting an "R" type adaptor (not supplied) to throat extension.

Ridge Ventilation Terminals provide a weatherproof multi-purpose ridge terminal. Completely weatherproof, this terminal offers an alternative method of ridge ventilation to the Ventilated Dry Ridge System and may be connected to a mechanical extract system or Passive Stack Ventilation.

Authority
Correct use of Marley Ridge Ventilation Terminals will meet the requirements of The Building Regulations 1991 as amended, Approved Document F2, The Building Standards (Scotland) Regulations 1990 - 1994 Part G, where appropriate and BS 5250. Agrément Certificate No 89/2223 applies to the use of this terminal for roof ventilation and mechanical extract systems.

Composition
Injection moulded dark grey PVC-u ventilation cowl and riser, sealed and bolted to Segmental profile concrete ridge tile. Injection moulded dark grey PVC-u Adaptor with Polypropylene Flexible Pipe (in Plumbers Accessory Pack).

Performance
The Marley Ridge Ventilation Terminal provides for the ventilation of the roof apex, and when connected via the Adaptor and Flexible Pipe, is also suitable for use with mechanical extract systems, or Passive Stack ventilation. The Ridge Ventilation Terminal provides 9,500mm² free area ventilation and has been tested by BSRIA to determine pressure resistance (Pa) values as detailed in the table below.

Compatibility
Suitable for all roofs of 15° - 60°, Marley Ridge Ventilation Terminals may be either mortar bedded or installed with the Marley Ventilated Dry Ridge System. Ridge Ventilation Terminals are compatible with the range of Marley Ventilation products and can be used to supplement either 10mm or 25mm Eaves Ventilation Systems. Connection to mechanical or passive ventilation systems can accommodate 82mm - 110mm diameter ductwork. The terminal is not suitable as an exhaust for hot gases.

Installation
Ridge Ventilation Terminals should be installed in a horizontal position, clear of any obstructions likely to hinder the airflow of exhaust fumes and 600mm away from any Gas Ventilation Ridge Terminal or other flue outlet. If a ridge board is used in the roof construction, it should be cut and trimmed for a length of 400mm, with the roof underlay cut and formed to fit neatly to the sides of the riser. When used with the Ventilated Dry Ridge System, a piece of the back of the Batten Section may require removal to facilitate the PVC-u riser. Blocked Filler Units are required for a distance of 600mm either side of the terminal, if connected to a mechanical extract system. A special Adaptor Ridge Union is available to suit Modern ridge tile applications.

Description
* Concrete Segmental Ridge tile base, in colours to match or complement the roof tiles.
* Fully weatherproof injection moulded PVC-u cowl and riser incorporates deflectors and ventilation slots to prevent ingress of wind driven rain and snow. The cowl is bolted to the ridge base and is grey in all cases.
* Can be connected to fully supported 110mm internal pipework by using a PVC-u adaptor and flexible pipe.
* Wind tunnel tested.
* Performance tested by BSRIA.
* This product is NOT suitable as an exhaust for hot gases 

The Marley Eternit in-line clay tile vent provides 7,500mm² free airspace.

The in-line clay tile vent offers a practical and unobtrusive solution to the problem of roof space ventilation.

The vent is also suitable for terminating soil and vent pipes and mechanical ventilation, as well as passive stack ventilation. For these applications a detachable extension sleeve is supplied, and an optional 100/125/150mm stepped pipe adaptor is also available.