Clay Cloak Verge
An alternative to traditional mortar bedded verges. The verge units blend with clay plain tiles to form a durable and attractive verge detail.
For use with clay plain tiles.
Marley Eternit cloak verge systems consist of simply installed composite concrete tile and verge units designed to eliminate the need for mortar bedding. They provide a mechanically fixed, durable and maintenance-free finish to the roof verge.
Cloak verge units are suitable for both new and refurbishment work on duo and mono-pitched roods with either brick, render or barge board verge construction.
Clay Plain Tile Fittings
Left and ridgt cloaked verged tiles
LH bullnose tile and a half
LH hexagonal tile and a half
RH bullnose tile and a half
RH fishtale tile and a half
RH hexagonal tile and a half
Ridge vent pipe and adaptor
Vertical external 90° corner tiles
Vertical internal 90° corner tiles
Clay Ridges Hips and Valleys
Half round ridge stop end
Clay Crested Ridges and Finials
Clay Ridge Ventilators
Left and right cloaked verge tiles
LH bullnose tile and a half
LH fishtail tile and a half
LH hexagonal tile and a half
RH bullnose tile and a half
RH fishtail tile and a half
RH hexagonal tile and a half
Vertical external 90° corner tiles
Vertical internal 90° corner tiles
Clay Dry Fix Continuous Ventilated Ridges
Crested decorative dry fix ridge vent
Half round dry fix ridge vent
Plain angle dry fix ridge vent
Clay Plain Tile Contour Vent
Clay Ventilation Accessories
Sandringham Clay Fittings
Universal RidgeFast System
Universal RidgeFast is a low cost, ventilated dry ridge system designed specifically to provide a quick and easy way to install a ventilated dry ridge, without compromising efficiency or cost effectiveness.
Universal RidgeFast is a low cost, ventilated dry ridge system suitable for use with all standard ridges, tiles and slates.
Its fast
Universal RidgeFast is the fast and easy way to install a ventilated dry ridge. This unique system is designed to simply roll out along the ridge and is far quicker than mortar bedding.
It's value for money
Everything that’s needed for a perfect ventilated ridge is in one handy 6m box and is competitively priced compared to similar systems.
It's Universal
Thanks to a unique fixing system Universal RidgeFast can be used with all standard ridges, tiles and slates. The 6 metre roll is easily moulded to the shape of any tile or slate and the grey colour of the side flashing replicates a mortar finish.
It's quality assured
It may be competitively priced but, just like all Marley Eternit products, Universal RidgeFast passes all the necessary standards with flying colours. Tested and complies with BS 5534 and BS 5250.
It's ventilated
Provides a minimum ventilated area of 5,000mm per linear metre and is suitable for ventilating flat tiles. Specially designed blanking strips allow you to use Universal RidgeFast with ridge and gas vent terminals.
It's maintenance free
The dry fixing method offers considerable advantages, not only in the speed of installation, but also in long-term economy and safety.
HipFast
HipFast is a dry fix hip system that can be used with all tiles, slates and standard hip tiles. Quick and easy to fix, all of the components you need to install a HipFast system are available in just one box.
For use with clay, fibre cement, concrete tiles and slates.
Universal HipFast is a dry fix hip system that is compatible with all tiles, slates and standard hip tiles.
It's fast
Universal HipFast is quick and easy to install, thanks to its mechanical fixing method and the simple roll out operation of the hip roll.
It's value for money
All of the HipFast components are available in just one box and have enough product to fix a 6m length hip.
It's Universal
HipFast can be used with other manufacturers’ tiles, slates and standard hip tiles, not just Marley Roofing’s.
It's quality assured
As you would expect, HipFast passes all the necessary standards with flying colours. Tested and complies with BS 5534.
It's maintenance free
The dry fixing method offers considerable advantages, not only in the speed of installation, but also in long-term economy.
10mm and 25mm Eaves Vent System
Marley Eternit universal eaves ventilation systems are designed to provide continuous 10mm and 25mm free vent areas to roof voids in an efficient and unobtrusive manner.
Designed to provide continuous 10mm or 25mm free vent areas to roof voids, Universal Eaves Vent provides an efficient and unobtrusive roofing solution. Once again, this universal Marley system is suitable for use with virtually all tiles and slates.
It's fast
The 6m Continuous Rafter Roll makes for a quick and simple installation process. The length of the rafter simply rolls out along the length of the eaves.
It's value for money
All the components required to install the Eaves Vent System is contained in one handy 6m box.
It's Universal
Compatible for use with all tiles and slates.
It's quality assured
Quality tested and complies with BS 5250.
Clay Ridge Ventilators
Marley Eternit ridge ventilators are available in a variety of plain and decorative finishes to match the ridge tiles.
For use with clay plain tiles.
Marley Eternit ridge ventilators are available in a variety of plain and decorative finishes to match the ridge tiles.
All ridge ventilators are supplied with an extension sleeve to ensure a clear air path from the roof void to the outside.
A ridge pipe adaptor and flexible pipe are also available to allow the ventilator to be used for soil or mechanical ventilation.
Dry Fix Continuous Ventilated Ridges
The Marley Eternit dry ventilated ridge system provides continuous roof space ventilation at the ridge.
For use with Acme and Hawkins clay plain tiles.
The Marley Eternit dry ventilated ridge system provides continuous roof space ventilation at the ridge, equivalent to not less than 5,000mm²/m, combined with a secure mechanical ridge fitting. The visible components are supplied in a dark grey mortar colour.
This product is available to suit half round, plain angle ridges (90°, 105°, and 115° available) and crested decorative ridges.